Double Store - Play & Store
Add to wish list

Product Code: PS150547

£1,000 ex. VAT

At twice the length of our Single Store the Double Store provides twice the potential storage space and offers much more in terms of versatility and role play options.

The Double Store has two doors to the front with external bolts placed at the top of each door allowing independent locking/opening.

Both doors are hinged with “piano” or continuous hinges to eliminate the potential of children trapping their fingers when the doors are open.

The Play & Store Double Store does not have an internal dividing wall which means it is possible to store and manoeuvre long items easily.

The Double Store also has the advantage of providing a great deal more in terms of potential role play games as it can still be utilised in play even if one side holds stored items and obviously provides twice the space for play if it is fully emptied.

The independent locking also allows the Double Store to fulfil a greater of variety of role play functions as it can be one thing when the left hand door is open, another when the right hand door is open and another again when both doors are open.

Enquire Now Spec Sheet Technical Drawings
  • Dimensions
    Width Depth Height to Eaves Maximum Height
    2.2m (7ft 3in) 1.1m (3ft 7in) 1.4m (4ft 6in) 1.7m (5ft 10in)
  • Specification
    Play & Store

    All our doors are built with safety as a paramount concern. All are a special non-trap design, using a piano hinge down the whole length of the door, and then a rebate on the inside of the hinged side.

    • When the door is in the closed position there is a taper between the door and frame, so should little fingers be left in the way they will not be pinched.
    • The doors are made using 100mm x 50mm frame and then TGV attached

    The cut out inserts are made from 12mm external WBP plywwod with TGV glued and pinned to it.

    Play & Store
    • The decking boards are top quality 35mm x 125mm grooved redwood boards that are pressure treated. 
    • The deck boards are screwed to the pressure treated 50mm x 100mm timber bearers
    Play & Store

    A standard finish, which is good at keeping out the weather 

    • 12mm wbp external grade plywood.
    • A layer of BBA approved weatherproof membrane is fitted to the plywood.
    • A layer of 38kg mineral felt will be fitted as the top surface and secured using galvanised staples.
    • In the case of a large roof, pressure treated batons are fitted perpendicular to the roof felt.
    • A facia and soffit board are fitted.
    Play & Store
    • We ensure that our playground storage solutions external walls are built to with stand all weather conditions.
    • The framework is built using a good quality, 38mm x 50mm profile pressure treated timber planed and sanded with swept edges.
    • The framework is fixed together using zinc yellow screws
    • 12mm pressure treated cladding is fitted to the outside of the framework, this is glued as well as pinned with 38mm galvanised pins 

    Treated With

    Walls & doors finished in Pressure Treated Timber.

    Pressure Treated Timber

    Colours are representative and may vary depending on your screen or printer calibration.

    All our products are built to fully comply with EN1176-1 playground regulations

  • Colours/Finishes

    This product is available in the following colour.

    Treated With

    Pressure Treated Timber

    Colours are representative and may vary depending on your screen or printer calibration.

  • Guarantee

    The product is guaranteed against structural and design defect for 3 years - this does not cover acts of vandalism, misuse or exceptional natural events

     As long as the maintenance instructions are adhered to, the product will last substantially longer.

    Maintenance Required

    • Ensure that an air gap is maintained under the base and around all sides; check on an regular basis to ensure that there is no build-up of debris.
    • Check edges and corners regularly to ensure that knocks to the structure have not caused a splinter hazard, if that has occurred sand down with sandpaper and re-treat the sanded area.
  • Delivery & Installation

    Delivered flat pack for self installation