A formula 1 style bridge

Dimensions

5ft (152cm) span

5ft (152cm) high

Colours

Finished in sadolin classic - Red

Specification

Your playhouse comes with a solid floor all ready to be laid onto a sub base, this can be shingle stones/concrete/paving slabs/tarmac/decking. The floor is constructed using 25mm x 50mmm tanolised bearers supporting an 18mm wbp external grade plywood floor: this is treated on the upper side with sadolin classic timber protection.  Sandwiched between the bearers and plywood is a damp proof membrane that then wraps around the edge and sits under the playhouse side.  The membrane is there to stop moisture coming up from the ground.

A soft floor is fitted to the ground floor of the playhouse once finished - this floor can be removed easily for cleaning.

Whilst this is our option one build, it should not be confused with a “shed” type construction, as each one of our playhouses are hand built in our workshops in Herefordshire and we only use superior quality materials.  Initially a framework is built using 50mm x 38mm redwood timber with rounded edges. To this we fix, using galvanised brads, good quality redwood shiplap timber; this makes the side panels. These panels are then sanded and treated on the outside using two coats of Sadolin wood preservative. These are then fitted together on site, a clear silicon seal is applied to all the corners.

The playhouse roof is built to withstand the English climate; 75mm x 50mm bearers are put across from side to side. Screwed to these bearers is 12mm external quality plywood covered with a base layer of waterproof membrane and then a top layer of 38kg mineral felt, using stainless steel staples. The felt is wrapped over the front and back and sealed behind the facia board.